Beach Freeze Protected Solar Hot Water Kit

Regular price $1,397.00

Shipping calculated at checkout.

Please allow for longer lead times.

Our Beach Freeze Protected Solar Water Heating Kit allows you to install a solar hot water system you can operate year round in harsh marine environments. This kit includes MH-38 Panels and a Stainless Steel Heat Exchanger with a special food grade heat transfer fluid (DOWFROST) to create a separate freeze-protected loop. Filling your separate loop is easy with our Glycol Fill Valve. Please use our Glycol Calculator to determine the dilution ratio for winter conditions in your area as well as the total amount of glycol concentrate you need. As with all our systems, they connect directly to your existing water heater and don't interfere with an existing source of heat (gas or electric). This way you can enjoy hot water even during long cloudy periods.

Each panel weighs 12 lbs. and is 24" by 24" but can still provide you with ample hot water. You can begin your system with a few panels and add more if you need more. With this kit you DO NOT have to solder at all! Each kit comes with:

Your selected quantity of MH-38 Panels
1 Grade A 25W PV panel to power the pumps - NO grid connection required - plus wire and PV mounting kit
1 Heliatos HS-21 Pump for the Glycol Side
1 TopsFlo TD5 Stainless Steel Pump for the Water Side
1 Heliatos Glycol Fill Valve
1 Heliatos Bottom Feed Connector
1 Compact Stainless Steel (Alloy 316) Heat Exchanger
1 Amtrol Expansion Tank
1 Complete Set of Fittings and Adapters
DOWFROST Food Grade Propylene Glycol Heat Transfer Fluid. 2 quarts for kits 4 panels or less. 4 quarts for 5 panels or more.
Instructions for Installation- Single Row
Instructions for Installation- Double Row

All You have to supply is:

Your choice of 1/2" Pipe from the panels to the water heater (Copper, CPVC, or PEX)
Fasteners to attach the panels to the roof, and the parts to feed the pipes through the roof if needed.
Insulation for the pipes.
Your existing Water Heater
Tools needed for installation

Click here to see more info about how many panels you need.

This product fits any existing water heater with a "boiler drain" near the bottom. This includes almost all gas and electric powered residential units.

Please Note - Will NOT work with Marathon Non Metallic (Plastic) Water Heaters.

Made in the USA