This pump has been designed to provide versatility and performance not available in any other high temperature DC operated pump. It can be powered from any fixed (6V - 24V) source or directly from a PV Solar Panel. The power level can be manually selected or the pump can automatically optimize power draw from a PV panel for maximum flow rate using advanced MPPT (maximum power point tracking) technology.
When powered from fixed sources it is suitable for a host of applications in cars, boats, and RV's that require high temperature and pressure capability. In Solar Water Heating systems this pump can be connected directly to a PV panel eliminating the need for any controllers and sensors.
This pump fully complies with the new Federal "Lead Free Plumbing" laws!
Areas of Use:
Solar Water Heating Systems
Hot Water Circulation
Radiant Floor Heating
Heat Transfer Applications
Cooling Systems
Food Grade Liquid Transfer
General High Temperature/Pressure Pumping
Main Features
Full Stainless Steel Pump - Can Run With Hot Water (230o F) and at High Pressure (145 psi)
Selectable Power Level or full MPPT power optimization
Brush-less and Seal-less, nothing to wear out
Advanced Magnetic Drive Technology
Durable Permanent Magnet Rotor with Ryton Impeller
Full Stainless Steel Pump Housing
Ceramic Shaft
Designed for Continuous Operation, Rated for 30,000 hours
All Food Grade Materials
Whisper Quiet Operation, less than 45dB
1/2" NPT (US Standard) Threads on both Sides
Built-In Protective Functions
Drive Circuitry will sense dry operation and shut down to prevent damage
Will slow operation or stop completely when an over-temperature condition is detected. This can arise due to excessive fluid temperature or excessive ambient temperatures. The pump will automatically recover when temperatures return to a safe level.
Protected against overload conditions, such as can arise if the impeller is stuck due to debris.
Will detect over-voltage condition and shut down when voltage exceeds 28V. Will recover automatically when voltage falls below threshold.
Materials
All Wetted Parts are Food Grade
Stainless Steel Pump Housing
Ryton Impeller
Viton “O” Ring
Ceramic Ferrite Magnet
Technical Specs
Power Level (Selectable) 5W, 10W, 15W, 25W, MPPT Voltage Range 6V-24V Nominal Operating Voltage 17V Maximum Fluid Temperature 230ºF Maximum Fluid Pressure 145 psi Operating Noise ≤ 45dB Minimum Start-Up Power 2 Watts Maximum Head 14 ft. Maximum Flow Rate 5 gpm
