Freeze Protected Solar Water Heating Kit
Our Freeze Protected Solar Water Heating Kit allows you to install your solar water heater system in record time. This kit uses a Stainless Steel Heat Exchanger with a special food grade heat transfer fluid (DOWFROST) to create a system that can operate trouble free year round. The separate freeze protected loop means you do not have to drain your system during freezing. Please use our Glycol Calculator to determine the dilution ratio for winter conditions in your area as well as the total amount of glycol concentrate you need. As with all our systems they connect directly to your existing water heater and don't interfere with existing source of heat (gas or electric). This way you can enjoy hot water even during long cloudy periods. Based on our revolutionary EZ-37 Solar Water Heater panels with PUSH-FIT fittings, you simply plug the panels into each other. No more external connection pipes for multi panel installations! You don't even need a wrench for assembling the panel array.
Each panel weighs slightly over 12 lbs. and is 24" by 24" but can still provide you with ample hot water. You can begin your system with a few panels and add more if you need more. With this kit you DO NOT have to solder at all! Each kit comes with:
- Your selection of EZ-37 Panels
- 1 Grade A 25W PV panel to power the pumps - NO grid connection required - plus wire and PV mounting kit
- 1 Heliatos HS-17 Pump for the Glycol Side
- 1 TopsFlo TD5 Stainless Steel Pump for the Water Side
- 1 Heliatos Glycol Fill Valve
- 1 Heliatos Bottom Feed Connector
- 1 Compact Stainless Steel (Alloy 316) Heat Exchanger
- 1 Extrol Expansion Tank
- 1 Complete Set of Fittings and Adapters
- DOWFROST Food Grade Propylene Glycol Heat Transfer Fluid 2 quarts for kits 4 panels or less. 4 quarts for 5 panels or more.
- Instructions for Installation
All You have to supply is:
- Your choice of 1/2" Pipe from the panels to the water heater (Copper, CPVC, or PEX)
- Fasteners to attach the panels to the roof, and the parts to feed the pipes through the roof if needed.
- Insulation for the pipes.
- Your existing Water Heater
- Tools needed for installation
This product fits any existing water heater with a "boiler drain" near the bottom. This includes almost all gas and electric powered residential units.
Please Note - Will NOT work with Marathon Non Metallic (Plastic) Water Heaters.
Made in the USA
Alaska, Hawaii, Puerto Rico, and U.S. Virgin Islands may incur an extra charge
We do not ship kit and panels to P.O. boxes.
If you would like to ship to a P.O. box, please contact us at email@example.com or 661-7SOLAR7
Please allow 2-3 business days for shipping
Australian Customers: Please visit solaexchange.com.au
You have 30 calendar days to return an item from the date you received it.
To be eligible for a return, your item must be unused and in the same condition that you received it.
Your item must be in the original packaging.
Your item needs to have the receipt or proof of purchase.
Once we receive your item, we will inspect it and notify you that we have received your returned item. We will immediately notify you on the status of your refund after inspecting the item.
If your return is approved, we will initiate a refund to your credit card (or original method of payment).
You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are nonrefundable.
If you have any questions on how to return your item to us, contact us at firstname.lastname@example.org. Please include your order #, date of order, and contact info.
The manufacturer warrants this product to be free from defects in workmanship and materials, under normal residential use and conditions, for a period of one (1) year for the original invoice date.
There is a ten year "No Leak" warranty, which does not cover leaks due to freezing. To have a leaking panel repaired or replaced, within the 10 year leak warranty, the panel needs to be sent back to the manufacturer to be inspected (cost of return shipping is the customer's responsibility). If the panel is freeze damaged, a $50 repair fee or replacement fee will be charged. Shipping and handling fees are to be paid for by the customer.
The manufacturer agrees, at its option during the warranty period, to repair and defect in material or workmanship or to furnish a repaired or refurbished product of equal value in exchange without charge (except for a fee for shipping, handling, packing, return postage, and insurance which will be incurred by the customer). Such repair or replacement is subject to verification of the defect or malfunction and proof of purchase as confirmed by showing the model number on original dated sales receipt.
WARRANTY LIMITATIONS This warranty does not include:
Any condition resulting from other than ordinary residential wear or any use for which the product was not intended, such as freezing damage or use in rental or contract trade or commercial use.
Any condition resulting from incorrect or inadequate maintenance or care
Damage resulting from misuse, abuse, negligence, accidents or shipping damage
Dissatisfaction due to buyer’s remorse
Normal wear and tear
Damages incurred during transportation
Damages incurred during assembly or maintenance
Any used, previously displayed items
The Company makes no express warranty or condition whether written or oral and the company expressly disclaims all warranties and conditions not stated in this limited warranty. To the extent allowed by the local law of jurisdictions outside the United States, the Company disclaims all implied warranties or conditions, including any implied warranties of merchantability and fitness for a particular purpose. For all transactions occurring in the United States, any implied warranty of condition of merchantability, satisfactory quality, or fitness for a particular purpose is limited to the duration of the express warranty set forth above. Some states or countries do not allow a limitation on how long an implied warranty lasts or the exclusion of limitation of incidental or consequential damages for consumer products. In such states or countries, some exclusions or limitations of this limited warranty may not apply to the Purchaser. For consumer transaction, the limited warranty terms contained in this statement, except to the extent lawfully permitted, do not exclude, restrict, or modify but are in addition to the mandatory statutory rights applicable to the sale of this Product to the Purchaser. All warranty claims must be filed by the consumer to the retailer of this product, who in turn is to contact the manufacturer regarding any warranty return or replacement. Please retain invoices for a minimum of one year for warranty purposes.
Claims for defective merchandise must be made within ONE year from invoice date. Claims for missing parts must be made within 60 calendar days after the merchandise is received
Any claim for defective merchandise returns must be packed in original packaging. Return shipping and handling fees are to be paid by the customer
To have a leaking panel repaired or replaced, within the 10 year leak warranty, the panel needs to be sent back to the manufacturer to be inspected (cost of return shipping is the customer's responsibility). If the panel is freeze damaged, a $50 repair fee or replacement fee will be charged.
We reserve the right to specify that items be returned to the manufacturer for inspection
Pictures are required to claim defective merchandise, along with a copy of the original invoice
If the claim is justified, the item(s) or part(s) will be repaired or replaced or a credit will be issued. It is our policy to replace parts whenever possible
Please contact us at email@example.com or 661-7SOLAR7 (661 776-5277) for more information about how to file your claim.